Back to products
Cooper Products
- All products
- Cooper Products159 products
PAVA Speakers2 products
Addressable Alarms and Beacons10 products
Addressable Call Points4 products
Addressable Control Panel Accessories3 products
Addressable Control Panel Spare Parts3 products
Addressable Control Panels12 products
Addressable Detectors: Bases3 products
Addressable Detectors: Point3 products
Addressable Detectors: Specialty2 products
Addressable Installation Accessories3 products
Addressable Interfaces14 products
Addressable Network and BMS10 products
Addressable Repeater Panels2 products
Addressable System Software9 products
BiWire & Conventional Repeater Panels0 products
Call Point Accessories5 products
Conventional Alarms and Beacons18 products
Conventional Call Points3 products
Conventional Control Panel Accessories1 product
Conventional Control Panels7 products
Conventional Detectors: Bases1 product
Conventional Detectors: Point7 products
Conventional Detectors: Specialty2 products
Conventional Door Retainers7 products
Conventional Interfaces1 product
Conventional Repeater Panels2 products
Detector Accessories2 products
EVCS Emergency Assist7 products
Installation Accessories3 products
VoCall Analogue System13 products
- Menvier Products8 products
Addressable Device Programmer – CF800PROG
The addressable device programmer (CF800PROG) is a versatile tool to aid the installation, commissioning, maintenance and servicing of current intelligent addressable devices and fire systems.
This unit is light, robust and easy to operate using a user friendly menu structure on 2 x 40 character LCD display. It is powered from a single PP3 size, heavy duty battery or an external supply.
This addressable device programmer has a built in addressable base as well as two external terminals for use with all other current addressable ancillary devices.
Addressable Lon Network Booster – EC540
The Lon Network Booster (EC540) is the solution to interconnect multiple EIA-709 channels. This unit provides up to 5 ports and routes packets between these ports. In spite of its small size the (EC540) provides best class performance and flexibility in use.
In order to provide the optimal router configuration the (EC540) supports 2 to 5 ports as well as the 2 operating modes “smart switch mode” and “configured router mode”.
Smart Switch Mode
The plug and play installation capability of the (EC540) allows connecting it to the network without any further configuration. The smart switch technology automatically detects the bit rates of the connected channels, learns the configuration of the network (domains, subnet/node addresses, group addresses) and forwards the packets between the different ports of the (EC540).
Addressable Loop Mimic LED PCB (Master) – ZPCB2252-MML
The ZPCB2252-MML is the master PCB that interfaces directly to the CIE via the addressable loop interface. The master board takes one address on the CIE and is assigned its address during the auto-learn cycle of the CIE (refer to the CIE manual for more details). This board provides 32 LED outputs which are powered from an external EN54-4 power supply.
Addressable Loop Mimic LED PCB (Slave) – ZPCB2252-MSL
The ZPCB2252-MSL is the slave PCB which has no loop interface to the CIE but is directly controlled by the ZPCB2252-MML board. Up to 7 slave boards can be daisy chained to the master board and each slave has 32 LED outputs allowing the number of LED outputs to be expanded up to a maximum of 250 (not all LEDs on the 7th slave are used). The power to these additional LEDs is also from the external power supply but is transferred through the interlinking cable between boards.
Cause and effect programming can be uploaded via the RS232 port to the master board to program how the LEDs will react to command/status information received from the CIE. This allows the LEDs to not only be used to show fire information but also faults, and can be configured to trigger by Zone, Panel, Loop or Address.
These boards are typically used for providing visual indications for fire or fault conditions on a site plan overlay.
Addressable Loop Splitter Unit – ZPCB2222
The loop splitter Interface enables the expansion of the CF3000 from a 4 loop panel to a 16 loop panel. Each loop of the CF3000 is connected to 4 sub-loops, totalling a maximum number of 200 addresses per the main loop.
Its mainly applicable in countries where the mixing of detectors, sounders, call points and interfaces are not permissible on the same loop or the number of devices per loop is limited to a small number.
Addressable Loop Tester Kit – LP800KIT
The loop tester kit is a hardware/software combination that can be used to test, commission and fault find a loop of up to 200 addressable devices (detectors, sounders, ancillary devices), without having to connect the loop to an Eaton addressable fire alarm system control panel.
Saving potential large amounts of time and as a consequence, money, compared to if a fault were to be identified after a being connected to the live system.
The loop tester is connected between the loop and PC. It allows the engineer to quickly identify and locate any loop device that is operating outside of its operating conditions, by varying the alarm threshold of any loop device (alarm, pre-alarm and fault).
Addressable Manual Call Point (Weatherproof) – CBG370WP
The addressed loop connected remote indicator is designed to provide discreet remote indication when a smoke, heat or photo-thermal fire detector that is inaccessible has been activated.
Able to monitor multiple detectors within an area thereby minimizing wiring requirements, the remote indicator is connected directly on the loop and is 'soft addressed' by the panel on system startup.
Addressable Manual Call Point – CBG370S
The Cooper CBG370S is an addressable manual call point for use with the Cooper range of analogue addressable fire alarm control panels.
These intelligent addressable callpoints are attractively designed, simple to install and are supplied as standard with a frangible glass element and a test key for ease of maintenance.
A comprehensive range of accessories are available to maximise the functionality of the callpoint for particular applications.
Addressable Manual Call Point – FXN501
Two versions of intelligent addressable callpoints are available in this range, the FXN501 which can be either surface or flush mounted and the FXN503 which is a weatherproof version. Both the FXN501 and the FXN503 are compatible with the Eaton: JSB range of intelligent addressable fire systems.
These intelligent addressable callpoints are attractively designed, simple to install and are supplied as standard with a frangible glass element and a test key for ease of maintenance.
A comprehensive range of accessories are available to maximise the functionality of the callpoint for particular applications.
Addressable Manual Call Point (Weatherproof) – FXN503
Two versions of intelligent addressable callpoints are available in this range, the FXN501 which can be either surface or flush mounted and the FXN503 which is a weatherproof version. Both the FXN501 and the FXN503 are compatible with the Eaton: JSB range of intelligent addressable fire systems.
These intelligent addressable callpoints are attractively designed, simple to install and are supplied as standard with a frangible glass element and a test key for ease of maintenance.
A comprehensive range of accessories are available to maximise the functionality of the callpoint for particular applications.
Addressable Micro Single Channel Input Unit – MCIM
Eaton's range of micro interfaces enable the connection of addressable fire alarm systems to fire and non-fire applications such as HVAC control circuits, plant shutdown circuits and sprinkler systems.
Included in the range is the micro zone monitor unit, micro single channel output unit and micro single channel input unit. All the units are soft addressed interfaces and incorporate short circuit isolators.
The range supports the installation and integration of Eaton's range of addressable fire alarm control panels, providing solutions for most design requirements
Addressable Micro Single Channel Output Unit – MCOM
An extensive range of micro interfaces are available to support our range of control panels, providing solutions for most design requirements.
The MCOM is a single output, soft addressed, micro interface, incorporating integral short circuit isolators. It is extremely compact and therefore ideal for incorporation into other equipment.
The MCOM is fully compatible with the current range of Eaton intelligent addressable fire control panels.
It is suitable for switching low voltage (24V dc at 1A maximum), via a set of non latching relay contacts.
It is suitable for switching HVAC control circuits, plant shutdown control circuits, fire door closure etc.