Two versions of intelligent addressable callpoints are available in this range, the FXN501 which can be either surface or flush mounted and the FXN503 which is a weatherproof version. Both the FXN501 and the FXN503 are compatible with the Eaton: JSB range of intelligent addressable fire systems.
These intelligent addressable callpoints are attractively designed, simple to install and are supplied as standard with a frangible glass element and a test key for ease of maintenance.
A comprehensive range of accessories are available to maximise the functionality of the callpoint for particular applications.
| Order Code | FXN503 |
|---|---|
| System | Addressable |
| Product Type | Call Points |
Simple to install and service
Surface, recessed, indoor or outdoor
Separate loop in and loop out
Eaton’s addressable call point range gives you the freedom to choose between a replaceable glass fragile element or a polycarbonate resettable element for ease of reuse.
It also comes with a reset key which gives you the ability to test the call point, reset a tripped call point, or remove the front cover to replace the glass element. Whichever version you choose, you can enjoy ease of operation.
• Quick and simple to install
• Single tool for test and access
• Robust construction
• IP65 version available
• Easy to maintain/service
• Soft addressed
• ntegral short circuit isolator
• Single address
• Fast fit clip on front cover
• High visibility status LED
• Wide range of accessories
• Heavy duty terminals
• Two models available:
– Internal
– Weatherproof
1. Surface callpoint has standard rear BESA fixing facilities. In addition, back box can accept top or bottom surface entry cables. Surface callpoint can also be flush mounted.
2. Callpoint has test facility via special test key to prevent unauthorised operation.
3. Insertion of test key for test purposes and for cover removal is at bottom of callpoint to facilitate ease of access when mounted next to door architrave.
4. Test key is dual function, used to test callpoint operation by simulating activation and also to allow removal of clip on cover to gain access to element.
5. Element is held in place by clip on self locking cover which can only be removed by use of a special tool (callpoint test key).
6. Separate loop in and loop out terminals are provided for all connections including screen continuity on intelligent
addressable callpoints.
7. Surface/flush callpoints are IP42, weatherproof is IP65.
| Surface / Flush Mounting Callpoint | FXN501 |
| Weatherproof Callpoint | FXN503 |
| Protective Hinged Cover, | CXPC |
| Spacer Plates (Pack of 10) | MBGSP |
| Recessing Bezels (Pack of 10) | MBGBEZ |
| Resettable Element Kit (Pack of 10) | MBGREKIT |
| Spare Break Glasses (Pack of 5) | UBSG |
| Callpoint Keys (Pack of 10) | MFBGKEY3 |
| Standards | EN54 Pt 11 & EN54 Pt 17 |
| Operating Voltage: | 17Vdc to 32Vdc |
| Quiescent Current: | < 250µA |
| Operating Temperature: | -10°C to +55°C |
| Humidity (Non-condensing): | 0 to 93% RH |
| Construction: | PC / ABS |
| Colour: | Red |
| Dimensions (HxWxD): | CBG370S – 87mm x 87mm x 57mm (36mm flush) CBG370WP – 87mm x 87mm x 59mm |
| Weight: | 0.2kg |
| Ingress Protection: | CBG370S – IP42 CBG370WP – IP65 |
| Compatibility: | Suitable for use with Eaton Addressable fire systems |
