Cooper CAP320 Intelligent Addressable Optical Smoke Sensor (MAP820 / FXN723)
These ranges of intelligent addressable sensors have been specifically designed to operate with Cooper intelligent addressable fire systems.
All sensors are third party approved to the relevant section of EN54 (part 7 for smoke detectors & part 5 for heat detectors).
The optical sensor (CAP320) is suitable for most applications giving the fastest response to slow burning or smouldering fires which give rise to large visible smoke particles.
| Order Code | 400002FIRE-0002X / CAP320 |
|---|---|
| System | Addressable |
| Product Type | Addressable Detectors: Point |
Surface mounting with CAB300 base
50m² or 100m² (subject to local standard)
All the intelligent addressable sensors are soft addressed allowing engineers to program the device at the panel instead of on location, reducing commissioning time and cost.
An onboard light emitting diode (LED) utilises light pipe technology to emit a light which is visible in 360° for peace of mind and easy maintenance.
Designed to integrate into any decor, Eaton’s range of addressable optical, multi-mode and photo thermal detectors all share a consistent clean design.
| Optical Detector | CAP320 |
| Photo Thermal “Dual” Detector | CAPT340 |
| Heat Detector | CAH330 |
| Standard Addressable Detector Base | CAB300 |
| Optical smoke detector (CAP320) | Photo-thermal detector (CAPT340) | Multi-mode heat detector (CAH330) | |
| Standards: | EN54 Pt7: 2000 +A1: 2002 +A2: 2006 EN54 Pt17: 2005 | EN54 Pt5 2000 + A1:2002, EN54 Pt7 2000 + A1:2002, EN54 Pt 17 | EN54 Pt5 2000 + A1:2002 EN54 Pt17 |
| Operating Voltage: | 18V dc to 30V dc | ||
| Standby Current: | 220μA (max) | ||
| Alarm Current: | 5mA (max) | ||
| Addressing Mode: | Auto address | ||
| Mounting Position: | Ceiling in open areas | ||
| Mounting Options: | Surface mount with CAB300 base | ||
| Area Coverage: | 100m² (subject to local standard) | ||
| System Wiring: | Min. 1.5mm, 2 core loop or spur | ||
| Rate of Rise: | N/A | ||
| Fixed Heat 77ºC: | N/A | ||
| Fixed Heat 90ºC: | N/A | ||
| AIR: | N/A | ||
| BS: | N/A | ||
| CS: | N/A | ||
| Indication: | 360° visibility light pipe | ||
| Operating Temperature: | -10°C to +60°C | ||
| Humidity (Non-condensing): | 0 to 95% RH | ||
| Construction: | PC/ABS | ||
| Colour: | White | ||
| Dimensions Excl Base (Dia x D): | 101mm x 33mm | 101mm x 43mm | 101mm x 43mm |
| Dimensions Incl Base (Dia x D): | 104mm x 45mm | 104mm x 55m | 104mm x 55m |
| Weight (Without Base): | 76g | ||
| IP Rating: | IP30 | ||
| Suitable for use with: | Eaton addressable fire systems | ||
| CAB300 standard addressable detector base | |||
| Construction: | PC / ABS | ||
| Colour: | White | ||
| Dimensions (Dia x D): | 104mm x 22mm | ||
| Compatibility: | Eaton’s addressable detector range | ||
