Addressable TCP/IP Interface – EC400

The (EC400) is high performance, reliable and secure network infrastructure device for accessing Eaton Lon Network of intelligent addressable control panels over intranet or ethernet.

The EC400’s built in configuration server manages up to 256 IP devices on 1 IP channel without a dedicated management PC.

This unit supports DHCP even with changing IP addresses in an intranet environment. The easy to understand, diagnostic LED’s allow installers to install and trouble shoot the device without expert knowledge and dedicated troubleshooting tool.

To connect the Eaton Lon network via intranet will require a minimum of 2 EC400’s. The first EC400 must be configured as a “configuration server” and the second as a “client”

The EC400 when configured as a server requires the address list of all the EC400’s IP addresses in the network.

Additional information
Order Code

EC400

System

Addressable

Product Type

Addressable Network and BMS

Contact me about this Product
Name
Email
Phone
Enquiry

CONNECT AND GO

Enables connection over intranet or ethernet

FAR-REACHING

Up to 256 IP devices on 1 IP channel

SIMPLICITY

Simple diagnostics through LEDs

Create an efficient and reliable network that you can depend on

Using a daisy chained line topology, the EC400 interface comprises an internal switch meaning up to 20 devices can be built, reducing the cost for network installation. With its IP switch, a redundant Ethernet installation can be setup, increasing system reliability.

Out of the box installer friendly

There’s no need for expert knowledge when it comes to installing the EC400 TCP/IP addressable interface, because it provides ease of installation through Auto-NAT, roaming and DHCP.

Benefits

• Uses existing infrastructure
• Ideal for remote mounting when used with
Eaton webserver software
• Easy to configure

Features

  • Loop powered
  • Soft addressed
  • Integral short circuit Isolator
  • Single address
  • High visibility LED
  • Can be programmed to monitor multiple remote sensors
  • Fits on to a standard singl gang back box
  • Aesthetically pleasing
TCP/IP InterfaceEC400
Operating Voltage:9Vdc to 35Vdc
Power Consumption:3W typical
In Rush Current:Up to 950mA at 24Vac
Operating temperature:-0°C to +50°C
Storage Temperature:-10°C to 85°C
Operating Humidity (Non-condensing):10 to 90% RH at 50°C
Storage Humidity (Non-condensing):90% RH at 50°C
Enclosure:DIN43 880
Dimensions (HxWxD):86mm x 105mm x 58mm
Ingress Protection:IP40 (enclosure)
IP20 (screw terminals)
Installation:Dill Rail mounting or wall mounting

DOWNLOADS

TEL: 254-774-211313

close
Start typing to see posts you are looking for.
Set your categories menu in Theme Settings -> Header -> Menu -> Mobile menu (categories)

Shopping cart

close
Scroll To Top