Eaton’s range of 2 or 4 zone conventional control panels are for small to meduim sized conventional fire alarm system installations. It features a simple “one-shot” user test facility, class change contacts, battery voltage alarms and charger temperature compensation, all as standard to ensure ease of use and high reliability.
Within its compact housing, the design also incorporates a neat logbook holder below the interface, enabling essential records to be stored close to hand for quick reference.
The range is designed to be installed in small to medium-sized commercial buildings such as hotels, restaurants, retail units, care homes, warehouses and supermarkets.
| Order Code | FX2202CPD |
|---|---|
| System | Addressable |
| Product Type | Conventional Control Panels |
Meets EN standards EN54 parts 2 & 4, and EN 50130-4
Walk-test functionality facilitates system testing
High-specification panel that suits a wide-range of conventional fire projects
Suitable for small to medium-sized commercial buildings, such as hotels, restaurants, retail units, care homes, warehouses and supermarkets, the range offers easy customer configuration by design.
Suitable for small to medium-sized commercial buildings, such as hotels, restaurants, retail units, care homes, warehouses and supermarkets, the range offers easy customer configuration by design.
Whether fitting out a building extension, retrofitting an outdated system or looking to benefit from the cost and time benefits of two-wire technology on a new build and want to utilise certain conventional devices; BiWire Flexi gives you the power to adapt the system to the site.
| 2 Zone Panel | FX2202CPD |
| 4 Zone Panel | FX2204CPD |
| Steel Recessing Back Box | FX22003300 MB |
| Fire Alarm System Log Book | MFALOG |
| Description: | 2 / 4 Zone Control Panel |
| Standards: | EN54 Pt2 & Pt4 1998 EN50130 Pt4 1996, EN50130 Pt4 |
| Number of Zones: | 2, 4 |
| Detectors per Zone: | 30 |
| Number of Alarm Circuits: | 02-Apr |
| Alarm Circuit Load: | 2 Zone: 150mA per circuit, 0.3A total 4 Zone: 400mA per circuit, 0.8A total |
| End Of Line Devices: | Detection circuits: EOLM-1 monitoring unit Alarm lines: 6.8KΩ resistor |
| Auxiliary Fire Signal / Fault Output: | 1A 24Vdc single pole changeover contacts |
| Auxiliary DC Output: | 24Vdc fused. 30mA |
| Repeater Port: | Yes |
| Mains Input Voltage: | 230Vac -15% +10% |
| System Operating Voltage: | 24Vdc |
| Standby Duration: | 24 hours |
| Battery (Sealed Lead Acid): | 2 Zone: 1 x 3.2Ah 4 Zone: 1 x 3.2Ah |
| Recharge Period: | 24 hours |
| Operating Temperature: | -5°C to +40°C |
| Humidity (Non-condensing): | 0 to 75% RH |
| Construction: | Polycarbonate housing & back box |
| Dimensions (HxWxD): | Surface: 270mm x 332mm x 90mm Recessed: 279mm x 332mm x 122mm |
| Weight (Including batteries): | 2 Zone: 5.2kg 4 Zone: 5.8kg |
| Ingress Protection: | IP30 |
| Cable Entry: | Top: 12x20mm entries with blanking plugs, rear cable entry aperture |
