Eaton’s 8 zone conventional fire system panel delivers a straightforward, intuitive interface that makes programming and maintenance simple.
Approved to EN54-2&4, it offers a comprehensive set of functionalities in a modern, robust and discreet enclosure. Its appearance and performance make the panel well suited for life safety notification in a wide variety of small to medium sized buildings, particularly schools, warehouses, retail stores and office buildings.
With the addition of an isolator barrier the panel has the additional flexibility to monitor standard or intrinsically safe conventional zone circuits, making it suitable for industrial applications.
| Order Code | EFCV8Z |
|---|---|
| System | Addressable |
| Product Type | Conventional Control Panels |
One man test facility
Function for connecting 2 panels
Zones are switchable
Suitable for small to medium-sized commercial buildings, such as hotels, restaurants, retail units, care homes, warehouses and supermarkets, the range offers easy customer configuration by design.
Whether fitting out a building extension, retrofitting an outdated system or looking to benefit from the cost and time benefits of two-wire technology on a new build and want to utilise certain conventional devices; BiWire Flexi gives you the power to adapt the system to the site.
| 8 Zone Conventional Panel | EFCV8 |
| End of Line Module | EOLM-1 |
| 8 Zone Relays + FRE/FPE | BWOB8Z |
| Input Voltage Range: | 18.75 – 30.7V |
| Maximum Current Drawn from Battery: | 2.7A |
| Number of Zones: | 8 |
| Maximum Loading per Zone: | Standard Mode: 32 detectors and manual call points Intrisically Safe Mode: 10 detectors and manual call points |
| Standby Zone Voltage (Vmin – Vmax): | 19Vdc – 23Vdc |
| Alarm Zone Voltage (Vmin – Vmax): | 31Vdc – 33Vdc |
| Fuse Protection Per Zone: | 250mA PTC |
| End of Line A Termination: | Standard Conventional Zones – EOLM-1 Only Intrinisically Safe Zones – SKI Resistor |
| Number of Sounder Circuits: | 230V Ah +10%/-15% 50Hz |
| Maximum Loading per Circuit: | 250mA |
| Fuse Protection per Circuit: | 250mA PTC |
| End of Line B Termination: | 6K8 Resistor |
| Unmonitored Outputs – Fire, Fault, Interlink Relay: | Type – Volt-Free, Single Pole Double Throw Rating – 30Vdc, 1A Fuse – 500mA PTC |
| Auxilliary Output: | V – 18.15-30.7V Imax – 50mA Fuse – 50mA PTC |
| Unmonitored Inputs: Class Change | Open Circuit – Normal Panel Operation Short Circuit – Activate All Sounders |
| Repeater Port (use of this port is outside the scope of EN54): | Type – RS485 Nodes – 1 |
| Operating Temperature: | -5°C to +40°C |
| Relative Humidity (Non-condensing): | 93% +/-3% |
| IP Rating: | IP30 |
| Dimensions (WxHxD): | 375mm x 366mm x 134mm |
| Weight (excluding batteries): | 2.25Kg |
| Materials: | PC ABS Front and Rear |
| Standards: | EN54 Part 2 CIE & Part 4 PSE, BS5839 Part 1 |
