Conventional Repeater Panels
Conventional Repeater Panel – FXRP2200CF
To complement the FX2200CF range a repeater panel is available for connection to the 4 and 8 zone control panels.
This repeater panel (FXRP2200CF) has been specifically designed for ease of installation requiring only 2 interconnecting wires from the main panel this compared with up to 16 wires on many conventional panels represents a large cost saving both on material and labour.
Further repeater panels can be cascaded, again only using 2 wires. Standby time is not effected by the number of repeaters connected to each panel as each repeater has its own main supply and stand by battery.
The repeater is suitable for up to 8 zones and displays all the same functions as the main panel, but with the addition of a indicator test facility.
. Repeater matches the style and appearance of the control panel
. Requires only a single pair of wires to receive signals from control panel reducing cost of installation
. Facility for signaling to repeater panel provided as standard on 8 zone panel
. Surface or semi-flush mounting
. Displays essential information at other key locations in a large building/site
. Displays zone fire and fault conditions
1. Wall mounted by means of 4 fixing screws.
2. Cable entry at back.
3. 12 top entry gland holes with push out blanking plugs.
4. 4 separate rear access cable entry facilities.
5. Local mains supply required and must be routed via the designated 20mm conduit entry in the top or the rear of the housing.
- Product Code:FXRP2200CF
|Operating Voltage:||24V dc|
|Cable Size:||0.5 mm² to 2.5 mm²|
|Operating Temperature:||-10°C to +55°C|
|Humidity (Non-condensing):||0 to 95% RH|
|Dimensions (mm):||H 87 x W 87 x D 49|
|Suitable for use with:||Eaton intelligent addressable fire systems|