The control panels on a Cooper fire network communicate using pre-configured network variables and cannot normally be used with a BMS where binding is required.
The (EC200) dual-channel LonWorks BMS interface is an “add-on” to the network which translates the pre-configured network variables to a set of un-configured network variables which can then be bound to a BMS, giving full access to the fire network data.
The gateway has 2 channels:
Channel 1 – connects to the Cooper fire network
Channel 2 – connects to the BMS
| Order Code | EC200 |
|---|---|
| System | Addressable |
| Product Type | Addressable Network and BMS |
Full range to suit addressable fire system requirements
Helps monitor & manage building management systems (BMS)
Easy to install, use and diagnose issues
• Compact DIN rail mounting enclosure
• Fully compatible with Cooper fire network (no need for binding)
• Open protocol to 3rd party BMS system
• Allows a Cooper fire network to be controlled by a LonWorks enabled BMS
• Uses Echelon FT5000 smart transceivers for high noise immunity
• 32 message input buffer
• Extends Cooper network
• Plug and play
• No configuration required
• Simple to use
Used for Eaton network extension, the plug and play installation capability of the EC540 allows network connection without any further configuration. It uses smart switch technology to automatically detect the bit rates of the connected channels,and learn the configuration of the network (domains, subnet / node addresses, group addresses).
| Single Mode Lon to Fibre Optic Adaptor | CFSL01 |
| Dual Channel Lon to Fibre Optic Adapter | CFSFL02 |
| Dual Channel LonWorks BMS Interface | EC210L |
| Lon to RS232 Adapter | ECO232 |
| Lon to RS232 Adapter (For HMX PA/VA Systems – No Handshake) | EC0232PAVA |
| Lon to RS232 Adapter (For HMX PA/VA System – 3 Min Time Delay) | EC0232PAVA3D |
| Dual-Channel LonWorks BMS Interface (Non Handshaking) | EC200 |
| Dual-Channel LonWorks BMS Interface (Handshaking) | EC200H |
| Dual-Channel LonWorks BMS Interface (Self configuring or use with EC700) | EC200S |
| Lon Network Booster | E540 |
| Code: | CFSFL01 | CFSFL02 |
| Description: | Single Mode Lon to Fibre Optic Adapter | Dual Channel Lon to Fibre Optic Adaptor |
| Operating Voltage: | 24Vdc | 24Vdc |
| Communications Protocol: | LonWorks | LonWorks |
| LonWorks Connectors: | Screw terminal block | Screw terminal block |
| LonWorks Rate: | 78 Kbps / 1.25 Mbps | 78 Kbps / 1.25 Mbps |
| Bit Error Rate: | 1.00E-08 | 1.00E-08 |
| Wavelength: | 1310nm | 1310nm |
| Fibre Type: | Single mode fibre | Single mode fibre |
| Fibre Diameter: | 9/125 micron | 9 / 125 micron |
| Fibre Connector: | SC type (optional ST type) | SC type (optional ST type) |
| Link Distance: | 15km | 15km |
| Operating Temperature: | -30°C to +70°C | -30°C to +70°C |
| Humidity (Non-condensing): | 20 to 90% RH | 20 to 90% RH |
| Dimensions (HxWxD): | 116mm x 136mm x 34mm | 116mm x 136mm x 34mm |
| Code: | EC210L | EC200 / EC200H / EC200S |
| Description: | Dual-Channel LonWorks BMS Interface | Dual-Channel LonWorks BMS Interface |
| Dimensions (HxWxD): | 86mm x 105mm x 58mm | 86mm x 105mm x 58mm |
| Standards: | CE | CE / UL compliant |
| Supply Voltage: | 12Vdc to 30Vdc | 12Vdc to 30Vdc |
| Supply Current: | <30mA | <30mA |
| Transceivers: | Echelon FT5000 / FT-X1 | Echelon FT5000 / FT-X1 |
| Baudrate: | 78kbs | 78kbs |
| Connectors: | 5mm screw terminals | 5mm screw terminals |
| Enclosure: | ABS DIN Rail Mounting | ABS DIN Rail Mounting |
| Code: | EC540 |
| Description: | Lon Network Booster |
| Operating Voltage: | 9Vdc to 35Vdc / 9Vac to 24Vac |
| Enclosure: | DIN43 880 |
| Dimensions (HxWxD): | 60mm x 105mm x 86mm |
| Ingress Protection: | IP40 (enclosure) |
| IP20 (screw terminals) | |
| Installation: | DIN Rail mounting or wall mounting |
