Emergency Assist Pull Cord Accessory Pack – CFEACORD

Cooper Menvier CFEACORD Emergency Assist Pull Cord Accessory Pack

The Emergency Assist Alarm – standalone kit provides the perfect solution for conformity with the Building Regulations Document M and Equality Act 2010.

This is a simple 2 wire system that has been specifically designed to meet the needs of disabled service users and conforms to all the relevant requirements; Disability Rights Commission code of practice, English Tourism Council Recommendations and RNIB signage guidelines.

The use of combined high output blue LED indication and buzzer ensures a response to the call.

The Emergency Assist Alarm – standalone kit comprises of all the components needed to install a fully compliant system, with additional parts available separately

Additional information
Order Code

CFEACORD

System

Addressable

Product Type

EVCS Emergency Assist

Contact me about this Product
Name
Email
Phone
Enquiry

DISCREET DESIGN

Easily incorporated into building décor

SOFT ADDRESSING

Quick and simple to install

CAUSE AND EFFECT

Programmable using cause and effect tables

Surface mount ready back box

Supplied with a standard single gang back box for surface mounting, making the remote indicator quick and easy to install.
 
The (MRIAD) is compatible with the Cooper range of intelligent addressable fire systems.

The device is connected directly on to the loop, and is soft addressed by the panel on system start up and is fitted with integral short circuit isolators.

When using site installer the intelligent addressable loop connected remote indicator should be programmed as an address output (sounder) and can be programmed using the comprehensive cause and effect tables to operate continuous, pulsing, by global, panel, zone, address or on double knock input etc.

Benefits

  • Quick and simple to install
  • Wide viewing angle for increased visibility
  • Discreet design for incorporation in to any decor
  • Can be remote mounted
  • Can be activated by cause and effect programming
  • Reduced cost
  • Minimises cabling
  • Easy to maintain/service

Features

  • Loop powered
  • Soft addressed
  • Integral short circuit Isolator
  • Single address
  • High visibility LED
  • Can be programmed to monitor multiple remote sensors
  • Fits on to a standard singl gang back box
  • Aesthetically pleasing

Installation

  • Mounting plate fixes to single gang back box or can be direct fixed to wall or ceiling.
  • Cable entry is normally from rear but breakouts are provided inside of base plate
  • Cables connect to terminals on PCB within base plate.
  • Front cover is pushed onto base plate and locks in place.
Loop Connected Remote IndicatorMRIAD
Loop Connected Remote Indicator (reset on reset)MRIADRR
Operating Voltage:24V dc
Quiescent Current:220μA
Alarm Current:6mA
Cable Size:0.5 mm² to 2.5 mm²
Operating Temperature:-10°C  to +55°C
Humidity (Non-condensing):0 to 95% RH
Construction:ABS
Colour:White
Lens Colour:Red
Dimensions (mm):H 87 x W 87 x D 49
Weight:0.28kg
Ingress Protection:IP30
Suitable for use with:Eaton intelligent addressable fire systems

DOWNLOADS

Success Stories

Look to the future, trust our past. Discover success stories and building references for Eaton’s Fire Detection Systems and Emergency Lighting products.

TEL: 254-774-211313

close
Start typing to see posts you are looking for.
Set your categories menu in Theme Settings -> Header -> Menu -> Mobile menu (categories)

Shopping cart

close
Scroll To Top