Addressable Network and BMS
Single Mode Lon to Fibre Optic Adapter – CFSFL01
The CFSFL01 Single Channel LON to Fibre Optic Adapter allows connection of Eaton’s system network (LonWorks) devices through optical fibre, and to allow both Point-toPoint or Multi-drop topology.
Using only Single-mode fibre optic, the CFSFL 01 adapter allows extension of the Eaton system network to a maximum distance of 15km with a transmission speed of up to 78kbit/s or 1.25Mbit/s.
Connection is made using SC type fibre optic connectors. In comparison with conventional twisted pair cable,
the fibre optic usage in a LonWorks network has many advantages: it is reliable and fast in long-distance network transmission even in difficult industrial environments (with transients, surges or electromagnetic interference etc.) without requiring any additional transient protection.
Full range to suit addressable fire system requirements
Helps monitor & manage building management systems (BMS)
Easy to install, use and diagnose issues
• Extends Cooper network
• Plug and play
• No configuration required
• Simple to use
Plug and play Lon network booster
Used for Eaton network extension, the plug and play installation capability of the EC540 allows network connection without any further configuration. It uses smart switch technology to automatically detect the bit rates of the connected channels,and learn the configuration of the network (domains, subnet / node addresses, group addresses).
|Single Mode Lon to Fibre Optic Adaptor
|Dual Channel Lon to Fibre Optic Adapter
|Dual Channel LonWorks BMS Interface
|Lon to RS232 Adapter
|Lon to RS232 Adapter (For HMX PA/VA Systems – No Handshake)
|Lon to RS232 Adapter (For HMX PA/VA System – 3 Min Time Delay)
|Dual-Channel LonWorks BMS Interface (Non Handshaking)
|Dual-Channel LonWorks BMS Interface (Handshaking)
|Dual-Channel LonWorks BMS Interface (Self configuring or use with EC700)
|Lon Network Booster