Stainless Bezel for Type B Outstation – CFVCFHB

VoCALL Type B outstations, used with analogue VoCALL emergency voice communication (EVC) systems, are designed to be versatile, compact and easy to use. They are designed to be used as a fire telephone, disabled refuge call system or as a combined system.

The outstation is available as both flush (via a separate bezel) or surface mounted with green, red or stainless steel finishes. All feature a high volume ringer, status LED and tactile braille signage providing a complimentary device to go with Type A outstations, master network handsets etc. in commercial buildings.

Additional information
Order Code

CFVCFHB

System

VoCall: Analogue

Product Type

Accessory

Contact me about this Product
Name
Email
Phone
Enquiry

ACCESSIBLE

Tactile Braille signage and loop output

COMPATIBLE

Works with all analogue VoCALL systems

COMPACT

Neatly designed for ease of installation

Type B and Type A outstations, when should they be used?

When choosing outstations for use with EVC systems we recommend referring to local regulations. In UK standards, for example, Type A outstations should be used for evacuation or fire fighting use and Type B should only be used where Type A outstations are impractical. For disabled refuges Type A or Type B Outstations can be used however Type B outstations can only be used where the background noise is below 40dBA.

Why must I have a disabled refuge emergency voice communication system?

Risk assessments of new buildings must make provision for means of escape of disabled people in line with the Regulatory Reform (Fire Safety) Order. Building Regulations dictate new non-domestic buildings with 1+ stories provide ‘refuge’ areas – relatively safe places where people who cannot easily escape can call for assistance and wait for help. Simple two-way communication in these areas is essential, to assist rescue teams in determining where assistance is needed and to reassure people help is coming.

What is a fire telephone and what do they do during an emergency?

Fire telephones are hardwired full duplex communications systems with monitoring and battery backup and are required in buildings over 4 stories in many countries in the world. These are provided as a backup to traditional fireman’s radio systems, which can fail to operate in many high rise environments due to a large amount of steel in the building, and the “corona” effect of fire on radio broadcasts.

VoCALL – Trusted emergency communications system for projects large or small

VoCALL suits all sizes of installation from one and two outstation systems in small shops like Bon Marche, to a massive 364 line dual network system at Westfield Shopping Centre in London’s White City.

Over the years VoCALL has been installed on several high profile projects in some of the world’s most prestigious sites, from Wimbledon AELTCC and St Pancras stations in the UK to the Marina Towers and Jumeirah Tunnel in the Middle East.

Benefits

• Versatility, the unit can be
used on all the VoCALL
systems.
• Full duplex operation,
allowing 2 way voice
communication.
• Tactile braille signage to
assist partially sighted
people to easily operate
refuge point.

Features

  • • Compact design
    • High volume ringer
    • Status LED
    • 20mm cable glands
    • Loop output for hearing
    impaired users
    • Tactile braille signage
    • Full duplex operation
    • Flush bezel available
    • Stainless steel option

Mounting

All type B handsets should be mounted at a height
of either 1200mm from the floor, or on a 1400mm
centre line to comply with the requirements of
Building Regulations Document M (access for the
disabled).

The back box has 4 indented feet to allow
mounting on uneven walls.

Type B handsets can be flush mounted by cutting
a hole 133mm x 133mm and 45mm deep, and
using the stainless steel bezel (CFVCFHB) to finish
the surround

CFVCSHFSurface Mount Red
CFVCSHFGSurface Mount Green
CFVCFHFSSSurface Mount Stainless Steel
CFVCFHBStainless steel flush mounting bezel for use with any Type B Outstation
TypeFire rated (some installations will require enhanced cabling, see wiring guide for details)
Cores2 core 1mm or 1.5mm
Distance500m
Status LEDs2 off red (flashing for location lights, solid in use)
Call ButtonPress to call button
Cancel ButtonPress to cancel button
ConstructionZintec, Powder Coated
Colour OptionsRed / Stainless Steel
Weight1.105kg
MountingSurface or flush
Mounting Height                                           1000mm from the finished floor level to the centre point of the unit
Cut-out140mm x 140mm (flush mount units)
ClearanceWhen units are used as refuge call points suitable space for a wheelchair user must be allowed

DOWNLOADS

TEL: 254-774-211313

close
Start typing to see posts you are looking for.
Set your categories menu in Theme Settings -> Header -> Menu -> Mobile menu (categories)

Shopping cart

close
Scroll To Top