Back to products
Cooper Products
- All products
- Cooper Products159 products
PAVA Speakers2 products
Addressable Alarms and Beacons10 products
Addressable Call Points4 products
Addressable Control Panel Accessories3 products
Addressable Control Panel Spare Parts3 products
Addressable Control Panels12 products
Addressable Detectors: Bases3 products
Addressable Detectors: Point3 products
Addressable Detectors: Specialty2 products
Addressable Installation Accessories3 products
Addressable Interfaces14 products
Addressable Network and BMS10 products
Addressable Repeater Panels2 products
Addressable System Software9 products
BiWire & Conventional Repeater Panels0 products
Call Point Accessories5 products
Conventional Alarms and Beacons18 products
Conventional Call Points3 products
Conventional Control Panel Accessories1 product
Conventional Control Panels7 products
Conventional Detectors: Bases1 product
Conventional Detectors: Point7 products
Conventional Detectors: Specialty2 products
Conventional Door Retainers7 products
Conventional Interfaces1 product
Conventional Repeater Panels2 products
Detector Accessories2 products
EVCS Emergency Assist7 products
Installation Accessories3 products
VoCall Analogue System13 products
- Menvier Products8 products
Conventional Photo-Thermal Sensor (Value Range) – 400020FIRE-0034X
Typical applications:
Ideal for both fast-flaming and slow smouldering fires. Dual purpose detector to detect smoke, heat or a combination, supported by high immunity against unwanted alarms.
Conventional Reflective Beam Detector 5-50m – MBD50R
Cooper MBD50R Conventional Reflective Beam Detector - 50m Range
The Menvier range of zone powered reflective beam detectors are specifically designed to be compatible with the full range of conventional Menvier control panels.
Two versions are available, the MBD50R with a range of up to 50 metres, and the MBD100R with a range of 50 - 100 metres.
Both of these units are extremely simple to install, they require no separate power supply, operate on a reflective principle and have a simple set up mode to enable easy and quick alignment during installation. Beam detectors are designed to replace individual point detectors in large open areas such as warehouses.
Fire and fault conditions are signalled to panel using standard zone wiring so no additional interconnection is required.
In normal operation only one beam detector may be connected per zone, however special versions are available to work with external power supply if multiple beam detectors are required to be connected to a single zone
Conventional Reflective Beam Detector 50-100m – MBD100R
The Menvier range of zone powered reflective beam detectors are specifically designed to be compatible with the full range of conventional Menvier control panels.
Two versions are available, the MBD50R with a range of up to 50 metres, and the MBD100R with a range of 50 – 100 metres.
Both of these units are extremely simple to install, they require no separate power supply, operate on a reflective principle and have a simple set up mode to enable easy and quick alignment during installation. Beam detectors are designed to replace individual point detectors in large open areas such as warehouses.
Fire and fault conditions are signalled to panel using standard zone wiring so no additional interconnection is required.
In normal operation only one beam detector may be connected per zone, however special versions are available to work with external power supply if multiple beam detectors are required to be connected to a single zone
Conventional Repeater Panel – FXRP2200
JSB FXRP2200 Repeater Panel
To complement the JSB FX2200 range a repeater panel is available for connection to the 4 and 8
zone panels. This repeater has been specifically designed for ease of installation requiring only 2 interconnecting wires from the main panel this compared with up to 16 wires on many conventional panels represents a large cost saving both on material and labour.
Further repeater panels can be cascaded. With stand by time not affected by the number of repeaters connected to each panel as each repeater has its own main supply and stand by battery. The repeater is suitable for up to 8 zones and displays all the same functions as the main panel, but with the addition of an indicator test facility.
Conventional Repeater Panel – FXRP2200CF
To complement the FX2200CF range a repeater panel is available for connection to the 4 and 8 zone control panels.
This repeater panel (FXRP2200CF) has been specifically designed for ease of installation requiring only 2 interconnecting wires from the main panel this compared with up to 16 wires on many conventional panels represents a large cost saving both on material and labour.
Further repeater panels can be cascaded, again only using 2 wires. Standby time is not effected by the number of repeaters connected to each panel as each repeater has its own main supply and stand by battery.
The repeater is suitable for up to 8 zones and displays all the same functions as the main panel, but with the addition of a indicator test facility.
Conventional Sounder (Red Plastic, Shallow Base) FX002SB
This all-purpose sounder has been designed to be both robust and aesthetically pleasing to meet many build requirements.
A dependable and proven fire alarm renowned for its durability. Two versions of the low current conventional fire alarm surface sounder are available: the shallow base and the weatherproof deep base.
Both are compatible with the Eaton range of conventional fire alarm and notification systems providing clear coverage for emergency evacuation.
Out of the box, 32 different alarm tone selections and adjustable volume levels are available via an internal volume controller. Depending on the selected tone, sound levels of up to 105dB(A) can be achieved.
Conventional Sounder Base – MDS824
The conventional base mountable sounder (MDS824/FXN824) has a slim and aesthetically pleasing design and can be installed as either a discreet stand alone sounder or ceiling mounted with a detector and base.
The MDS824/FXN824 is compatible with the Eaton range of conventional detectors and fire systems. Mounting with a detector and base simplifies the installation of the system by enabling a detector and sounder to be fixed at a single common point.
When used as a stand alone sounder the device can be either wall or ceiling mounted and completed with an optional cover plate (MDS824COV).
These conventional base mountable sounders are ideal for applications such as hotel bedrooms where a detector sounder is required.
Conventional Wall Sounder (High Output) FX007
The JSB FX007 has a maximum output of 120dB(a) making it ideal for use in areas with high ambient noise levels.
It is simple to install and uses a first fix back plate onto which the main body attaches with a self-locking press fix assembly.
The conventional high output wall sounder has a maximum output of 120dB(a) at one metre, making it ideal for use in areas with high ambient noise levels.
Providing the maximum required noise output for use in emergency evacuations, ideal for areas of high ambient noise such as industrial applications such as warehouses and factories or even crowded public areas such as shopping centres.
Simple to install, the fire alarm sounder uses a first fix backplate onto which the main body attaches with a self-locking press fix assembly.
Conventional Wall Sounder (Low Current) – MLC624
The MLC624 low current sounder has been designed to provide a high sound output with a low current consumption.
It is ideal for applications where high sound levels need to be achieved but where available sounder circuit capacity is limited.
The low current sounder is simple to install and uses a first fix back plate onto which the main body attaches with a self locking press fix assembly.
Conventional Wall Sounder VAD (Red Plastic, Red Flash, Weatherproof) – FXSYG1WR-WP
The Symphoni LX WP Wall device offers a weatherproof alternative to the Symphoni LX Wall device. With an ingress protection rating of IP66, it is suited for wet and outdoor environments.
The Symphoni LX Wall visual alarm device (VAD) is a durable sounder beacon that is certified to EN 54-23. Boasting impressive performance and a durable design, it ensures reliability and energy efficiency. Its high sound output makes it suitable for open areas or where there is higher than normal background noise.
This range includes a standard version, providing UK alarm tones and an “E” version that has tones including the German DIN tone and the Netherlands Slow Whoop. The Symphoni LX is also available as a ‘base-only’ variant and both the normal and ‘base-only’ come in a weatherproof, IP66 variant.
Conventional Wall Sounder VAD (Red Plastic, Red Flash) – FXROLPWR
Conventional RoLP LX Wall Body Base & Sounder Visual Alarm Device Menvier FXROLPWR
The RoLP LX Wall is ideal for dual use applications where a visual alarm device is required in addition to an audible alarm.
The RoLP LX is a reliable, high performing VAD (Visual Alarm Device) that is certified to EN 54-23.
Recommended for wall use and requiring just one installation point, the RoLP LX Wall is also available as a base only for use with any standard RoLP sounder.
The Fulleon RoLP LX Wall device is ideal for dual use applications where a visual alarm device (VAD) is required to support an audible alarm.
Recommended for wall use and requiring just one installation point, the RoLP LX Wall is available to use with any standard RoLP sounder such as the high output RoLP Maxi sounder.
As well as European EN54-23 certification, the RoLP LX Wall VAD has extensive country-specific AFNOR, CNBoP and AS certifications and models specific to NF and VDS approvals.
Conventional Wall Sounder VAD (Red Plastic, Red Flash) – FXSYG1WR
The Symphoni LX Wall visual alarm device (VAD) is a durable sounder beacon that is certified to EN 54-23. Boasting impressive performance and a durable design, it ensures reliability and energy efficiency. Its high sound output makes it suitable for open areas or where there is higher than normal background noise.
This range includes a standard version, providing UK alarm tones and an “E” version that has tones including the German DIN tone and the Netherlands Slow Whoop. The Symphoni LX is also available as a ‘base-only’ variant and both the normal and ‘base-only’ come in a weatherproof, IP66 variant.